Home Lifts in Bangalore

Home lifts — also referred to as home elevators — for Bengaluru villas, duplex homes and independent houses, engineered around the property rather than to a fixed specification.

500+ Projects · Manufacturer · ISO Certified · Complimentary Site Assessment

Blackstone Elevators manufactures and installs home lifts across Bengaluru for independent villas, duplex homes, G+2 and G+3 residences and multi-level properties, in both new construction and existing houses. The configuration is determined after evaluating the available space, number of floors, building conditions and customer requirements.

Residential elevators are increasingly specified in Bengaluru, both as an accessibility provision and as part of the design of a new home.

A large proportion of enquiries concern existing properties rather than new builds, where the available space and structural conditions — not the budget — usually determine what is possible.

Home lifts engineered around the property

Blackstone evaluates the property and configures the elevator according to the site rather than applying one fixed specification to every home. That matters most in Bengaluru's residential pattern, where independent villas and G+2 or G+3 houses frequently sit on constrained plots with limited setback.

The appropriate home-lift configuration is determined after evaluating the available space, number of floors, building conditions and customer requirements. Cabin size, capacity, entrance arrangement and finishes follow from that assessment rather than preceding it.

Planning a home lift?

Share your property details and our team can assess the available space and advise which configurations are feasible.

Request a Home Lift Site Assessment

Adding a home lift to an existing house

Most residential enquiries in Bengaluru concern houses that were built without a lift. This is generally workable, because the structure supporting the lift can be built to suit the property rather than requiring a concrete shaft that was never provided for.

Blackstone supports installations in the following situations.

  • Existing villas
  • G+2 homes
  • G+3 homes
  • Staircase-area installations
  • External installations, positioned outside the existing building
  • Steel-structure shafts
  • Glass shafts
  • Installations where an existing RCC shaft is not available

Where a home lift can be positioned

Position is established during the site assessment and constrains the remaining decisions, which is why it is addressed first. The staircase area and an external position against the building are the two most frequently workable options in an occupied house, since both limit disruption inside the home.

Where a conventional shaft is not available, a steel or glass-clad structure can generally be built instead. Our technical guide covers the structural options in more detail.

Accessibility requirements

Home lifts are most often installed so that a member of the household can move between floors independently. Blackstone can provide home lifts suitable for senior citizens, wheelchair users and people with reduced mobility.

Cabin and door configurations can be customized according to accessibility requirements. Where wheelchair access is needed, we would recommend raising it at the first conversation, so that the cabin and the door are specified together rather than one after the other.

Customization

Cabin finishes, lighting, fixtures, doors and operating panels can be customized according to the project and interior requirements. For villas where the lift forms part of the interior design, this is generally settled alongside the structural decisions rather than at the end of the process.

How Blackstone approaches a home lift project

Blackstone Elevators manufactures and installs elevator solutions for residential and commercial projects, and installation is carried out by our own installation team.

Site assessment

The available space, number of floors, building conditions and access are evaluated, together with any accessibility requirement.

Configuration

The drive system, structure, cabin, doors and finishes are determined against the property and the customer's requirements.

Proposal

A technical and commercial proposal is issued setting out the configuration and the scope of works.

Manufacturing and installation

The elevator is manufactured to the approved configuration and installed by our own team.

Handover and service

The installation is tested and handed over, with maintenance and technical support available afterwards.

What to establish before committing

A home lift remains part of the property for many years, and the factors that matter most become apparent after installation. We would encourage prospective clients to put the following questions to every supplier under consideration, ourselves included.

  • Who manufactures the equipment, and who carries out the installation?
  • Has the supplier assessed the property before proposing a configuration?
  • What is included within the scope of works, and what is quoted separately?
  • How are maintenance and technical support handled after handover?
  • Which safety provisions are included in the proposal?

Bengaluru support

Blackstone Elevators operates across Bengaluru, with its Bengaluru operations based in HBR Layout. Our Bengaluru team supports site assessment, installation coordination and after-sales service for projects throughout the city.

North and north-east

HBR Layout, Hennur, Kalyan Nagar, Banaswadi, Ramamurthy Nagar, Hebbal, Yelahanka, Jakkur, Thanisandra and Sahakar Nagar.

East and south-east

Whitefield, Marathahalli, Indiranagar, CV Raman Nagar, KR Puram, Koramangala, HSR Layout, Sarjapur Road and Bellandur.

South and west

JP Nagar, Jayanagar, Banashankari, BTM Layout, Kanakapura Road, Rajajinagar, Malleshwaram, Vijayanagar and Yeshwanthpur.

Frequently asked questions

Can a home lift be installed in an existing Bangalore villa?

In many cases, yes, and existing properties account for a large share of our Bengaluru residential enquiries. Installations can be positioned in the staircase area or externally against the building, and the supporting structure can be steel or glass-clad where an RCC shaft is not available. Feasibility is established during the site assessment.

How do I know which home lift suits my house?

It is determined by the property rather than chosen from a range. The available space, number of floors, building conditions and your requirements together determine the configuration, and Blackstone establishes these during a site assessment before proposing a specification. Our technical guide explains how the drive systems and structural options differ.

How much space should I plan for a home lift?

The required space depends on the selected configuration, the cabin requirement and the building conditions, so we do not publish a universal minimum. Blackstone assesses the available area and advises what the property will accommodate before the elevator dimensions are finalised.

Can a home lift be installed without an RCC shaft?

Yes, in many cases. Where a concrete shaft is not available, the structure can be built as a steel structure, a glass-clad structure, an external structure positioned outside the building, or an indoor modular structure. Which is suitable depends on the property.

Is the lift suitable for elderly or wheelchair users?

Yes. Blackstone can provide home lifts suitable for senior citizens, wheelchair users and people with reduced mobility, with cabin and door configurations customized to the accessibility requirement. Raising this at the first conversation allows the cabin and door to be specified together.

How much does a home lift cost in Bangalore?

Cost depends on the configuration, the structure required, the number of floors, the customization specified and the site conditions, so it is established for the individual project rather than published as a range. Our guide to home lift quotations explains what determines the figure and what information we need to prepare a proposal.

Where are you based in Bangalore?

Blackstone Elevators operates across Bengaluru, with its Bengaluru operations based at Shop No. 7, First Floor, No. 649, 7th Cross Road, HBR Layout 5th Block, Bengaluru 560045. For Bengaluru enquiries, contact +91 70108 78424.

Planning a home lift in Bangalore?

Share your property type, number of floors, the space you have in mind and whether the installation is for a new build or an existing house, and our team can advise on a suitable configuration.

A site assessment establishes what the property will accommodate, and a technical and commercial proposal follows.

Blackstone Elevators – BengaluruShop No. 7, First Floor, No. 649, 7th Cross Rd, HBR Layout 5th Block, 1st Stage, Nagavara Village, HBR Layout
Bengaluru, Karnataka 560045
+91 70108 78424
Ask on WhatsApp